Setting Up Your Alarm
If you stay inactive for more than 4.5 seconds while setting the alarm, the Sleepr WakeBand™ will automatically return to the main time screen.

To continue setup, make sure to take action within that time.

Confirming settings:
Press and hold the button for 3 seconds to confirm each step—like switching from hours to minutes or saving your alarm time.

Need to restart?
No problem. From the time screen, hold the button for 3 seconds to restart the setup. The hour will start blinking again.

We recommend watching Emma’s instructional video—she clearly walks you through how easy it is to set up your Sleepr WakeBand™.

How to Set Up Your Sleepr WakeBand™

Press the button once to turn on your Sleepr WakeBand™. The time will appear on the screen.

Press and hold the button for 3 seconds to start the setup. The hour indicator will begin flashing.

Tap the button to set the hour, then hold it again for 3 seconds to switch to minutes.

Repeat this process to set the minutes, month, day, and year. You can also choose between a 12-hour or 24-hour format.

After setting the time and date, you’ll be asked to enter your height and weight. Hold the button until the indicator flashes, then tap to adjust each value.

When you’re done, simply stop pressing any buttons for 8 seconds. The Sleepr WakeBand™ will automatically save your settings and return to standby mode.

Your device is now ready to use!

Press the button five times to open the first alarm group.

If you see “A1 OF”, the alarm is currently off.

To turn it on, press and hold the button for 3 seconds—the hour indicator will start flashing.

Tap the button to set the hour, then press and hold again for 3 seconds to move to the minutes.

After setting the minutes, hold the button once more for 3 seconds to save the alarm.

Your alarm is now active.

Note: Once set, your alarm will repeat daily at the same time until you manually turn it off or adjust it. Perfect if you keep a consistent wake-up schedule.

To set additional alarms, press the button six or seven times to access the next alarm group, then repeat the same steps.

Turning Off the Alarm
Press the button the required number of times to open your active alarm.

Hold the button for 3 seconds, then tap until “A1 OF” appears.

Hold for another 3 seconds—your alarm is now turned off.

To check your Sleepr WakeBand™ battery, press and hold the button for 3 seconds while the device is in standby mode.

The screen will display the current battery percentage.

For charging instructions, scroll down and watch Emma’s video—she’ll show you exactly how to charge your Sleepr WakeBand™ properly.